hf: I got the cpu working. Thought I should clarify the controll that seems to say buffer size, it actually shows mixing latency as the heading and there is the "buffers in playback queue 2 That 2 doesn't seem to be able to be changed. then it says fast or safe. I don't know if that has anything to do with your problem. John ----- Original Message ----- From: <fioresq1@xxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Sunday, April 23, 2006 11:31 PM Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5 > hf: I have all those setting in sonar 4 and I'm still getting some > crackling. The only thing I can't check is the cpu meters with caketalking, > I've been told in the tutorial to present insert+controll+page dow, but when > I do that it says nothing. How did you read them? Also, I suppose you > could be having a conflict problem since you had the card working in sonar > 4Are you using 24 or 16 bit? Also, be aware that in the audio options > general tab jaws doesn't properly read the controll right before asio butto, > which is called buffer size. I had a sighted person look at that area, you > might want to check it. John > ----- Original Message ----- > From: "hf" <neep23@xxxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Sunday, April 23, 2006 8:34 PM > Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5 > > > > i/o buffers are set to 128. > > Most I've seen the CPU usage meter go up to is 24 or 25 percent. > > I was able to get to 40 percent in Sonar 4 before I started to get any > kind > > of drop outs. > > HF > > ----- Original Message ----- > > From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx> > > To: <ddots-l@xxxxxxxxxxxxx> > > Sent: Sunday, April 23, 2006 8:18 PM > > Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5 > > > > > > > Have you checked your disk i/o buffers in the advanced tab of the audio > > > options dialog? The setting of 128 should be good. Have you checked > the > > > CPU usage meter when you have a project loaded? > > > Gord > > > ----- Original Message ----- > > > From: "hf" <neep23@xxxxxxxxxx> > > > To: <ddots-l@xxxxxxxxxxxxx> > > > Sent: Sunday, April 23, 2006 8:12 PM > > > Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5 > > > > > > > > >> Yes > > >> ----- Original Message ----- > > >> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx> > > >> To: <ddots-l@xxxxxxxxxxxxx> > > >> Sent: Sunday, April 23, 2006 8:01 PM > > >> Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5 > > >> > > >> > > >>> Are you using asio? > > >>> Gord > > >>> ----- Original Message ----- > > >>> From: "hf" <neep23@xxxxxxxxxx> > > >>> To: <ddots-l@xxxxxxxxxxxxx> > > >>> Sent: Sunday, April 23, 2006 7:58 PM > > >>> Subject: [ddots-l] suggestions needed, audio dropouts in sonar5 > > >>> > > >>> > > >>>>I recently started working in Sonar 5 and I am having lots of audio > drop > > >>>>outs. The strange thing is that, these are the same projects that I > was > > >>>>working on in Sonar 4, except I didn't have any drop outs in Sonar 4. > > >>>> I kept reading as to how much faster Sonar 5 was to Sonar 4 and I'm > > >>>> finding quite the opposite. > > >>>> Although, it was suppose to have migrated my settings from Sonar 4, I > > >>>> must have either changed something or it did not migrate properly. > > >>>> I'm running out of ideas. Please help. > > >>>> This is mostly for audio, haven't tried too much midi yet. > > >>>> Which settings should I be aware of in Sonar 5 that may have changed > > >>>> from Sonar 4? > > >>>> HF > > >>>> ** To leave the list, click on the immediately-following link:- > > >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > > >>>> ** If this link doesn't work then send a message to: > > >>>> ** ddots-l-request@xxxxxxxxxxxxx > > >>>> ** and in the Subject line type > > >>>> ** unsubscribe > > >>>> ** For other list commands such as vacation mode, click on the > > >>>> ** immediately-following link:- > > >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > > >>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the > > >>>> Subject:- faq > > >>>> > > >>>> > > >>> ** To leave the list, click on the immediately-following link:- > > >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > > >>> ** If this link doesn't work then send a message to: > > >>> ** ddots-l-request@xxxxxxxxxxxxx > > >>> ** and in the Subject line type > > >>> ** unsubscribe > > >>> ** For other list commands such as vacation mode, click on the > > >>> ** immediately-following link:- > > >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > > >>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the > > >>> Subject:- faq > > >>> > > >> > > >> ** To leave the list, click on the immediately-following link:- > > >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > > >> ** If this link doesn't work then send a message to: > > >> ** ddots-l-request@xxxxxxxxxxxxx > > >> ** and in the Subject line type > > >> ** unsubscribe > > >> ** For other list commands such as vacation mode, click on the > > >> ** immediately-following link:- > > >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > > >> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the > > >> Subject:- faq > > >> > > >> > > > ** To leave the list, click on the immediately-following link:- > > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > > > ** If this link doesn't work then send a message to: > > > ** ddots-l-request@xxxxxxxxxxxxx > > > ** and in the Subject line type > > > ** unsubscribe > > > ** For other list commands such as vacation mode, click on the > > > ** immediately-following link:- > > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > > > ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the > > > Subject:- faq > > > > > > > ** To leave the list, click on the immediately-following link:- > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > > ** If this link doesn't work then send a message to: > > ** ddots-l-request@xxxxxxxxxxxxx > > ** and in the Subject line type > > ** unsubscribe > > ** For other list commands such as vacation mode, click on the > > ** immediately-following link:- > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > > ** or send a message, to > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq