The new list server for MIDIMag is working fine,. Are you unable to post to
the new MIDIMag list?
On 24 April 2016 10:20:38 BST, Lior goldfarb <goldlior85@xxxxxxxxx> wrote:
hi all,
is there any issues with the midimag list?, I have received a
conformation email from mike tyo and gordon kent which are the admins
of the list and there was a link to subscribe to the midimag-x list,
which is a new list serv.
do some one of you know what happens with this list.
sorry for the off-topic message.
On 4/23/16, Mark Burroughs <quarryman@xxxxxxxxxxxxx> wrote:
Hi guys,8.5.3x
Not a latency issue, but perhaps drivers? Settings?
New DAW from DD and Midi Sport 4 anniversary model using Sonar CT
Have a Roland TD 10 electronic drum set audio and midi'd up to my 16the
Channel
Mackie.
Audio has no delay at all; only the midi.
Successfully sussed out the initial delay (at least 2 seconds behind
actual triggering) by moving the midi plug from port D on the MidiSport to
port B. Three out of 4 ports seemed to be working... This was afteran hour
of changing cables, factory refreshing the TD10 and re-selectingcorrect
drums to see if it was the Roland.. Believed it was definitely theMidi
Sport.the 2
Thought we were good to go and recorded a song.
Unbelievably, on playback at about bar 60 the drum was behind with
second delay again. Since there was no delay for the first half ofthe song
or during the recording process ; I'm assuming it is not the TD 10 orMidi
Sport?not
Have already upgraded to current drivers on the Midi sport and have
changed any settings for midi in Sonar. Wouldn't know what to changePLEASE READ THIS FOOTER AT LEAST ONCE!
anyway.
Any ideas?
Frustrated in Texas
Now believing that MIDI stands for "Musician In Darn fIx"... smile
To unsubscribe, send a message to: midimag-unsubscribe@xxxxxxxxxxx
http://www.midimag.org/
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
