My cpu meter, using the jaws cursor says 0 percent. Is this abnormal? I can't seem to get the cpu to read with the caketalking hotkey. it says "small nudge." Has anyone had any experience with this problem? John ----- Original Message ----- From: "hf" <neep23@xxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Monday, April 24, 2006 3:41 AM Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5 > Hi John > I read the CPU meter by using the Jaws cursor. > I should be using 16 bit, although as you pointed out, jaws doesn't properly > read the control right before asio button. All I get is 0 percent and I > don't know what that means. Don't have a sited person right here to look at > things right now. But reading the box with the Jaws cursor, says that I'm at > 24 bit and next to it is a scroll down button. But clicking on it does > nothing. So if in fact I'm at 24 bit, either I can't change it or this is > the wrong place to do so. Changing the buffer size from 0 to 100 doesn't > seem to do anything. When I bring back the dialog box, buffer size is back > at zero. > Besides all that, Using Jaws 5.1 or narrator give no drop outs at all. I'm > using Jaws 7. > > HF > HF > ----- Original Message ----- > From: <fioresq1@xxxxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Sunday, April 23, 2006 11:31 PM > Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5 > > > > hf: I have all those setting in sonar 4 and I'm still getting some > > crackling. The only thing I can't check is the cpu meters with > > caketalking, > > I've been told in the tutorial to present insert+controll+page dow, but > > when > > I do that it says nothing. How did you read them? Also, I suppose you > > could be having a conflict problem since you had the card working in sonar > > 4Are you using 24 or 16 bit? Also, be aware that in the audio options > > general tab jaws doesn't properly read the controll right before asio > > butto, > > which is called buffer size. I had a sighted person look at that area, > > you > > might want to check it. John > > ----- Original Message ----- > > From: "hf" <neep23@xxxxxxxxxx> > > To: <ddots-l@xxxxxxxxxxxxx> > > Sent: Sunday, April 23, 2006 8:34 PM > > Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5 > > > > > >> i/o buffers are set to 128. > >> Most I've seen the CPU usage meter go up to is 24 or 25 percent. > >> I was able to get to 40 percent in Sonar 4 before I started to get any > > kind > >> of drop outs. > >> HF > >> ----- Original Message ----- > >> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx> > >> To: <ddots-l@xxxxxxxxxxxxx> > >> Sent: Sunday, April 23, 2006 8:18 PM > >> Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5 > >> > >> > >> > Have you checked your disk i/o buffers in the advanced tab of the audio > >> > options dialog? The setting of 128 should be good. Have you checked > > the > >> > CPU usage meter when you have a project loaded? > >> > Gord > >> > ----- Original Message ----- > >> > From: "hf" <neep23@xxxxxxxxxx> > >> > To: <ddots-l@xxxxxxxxxxxxx> > >> > Sent: Sunday, April 23, 2006 8:12 PM > >> > Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5 > >> > > >> > > >> >> Yes > >> >> ----- Original Message ----- > >> >> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx> > >> >> To: <ddots-l@xxxxxxxxxxxxx> > >> >> Sent: Sunday, April 23, 2006 8:01 PM > >> >> Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5 > >> >> > >> >> > >> >>> Are you using asio? > >> >>> Gord > >> >>> ----- Original Message ----- > >> >>> From: "hf" <neep23@xxxxxxxxxx> > >> >>> To: <ddots-l@xxxxxxxxxxxxx> > >> >>> Sent: Sunday, April 23, 2006 7:58 PM > >> >>> Subject: [ddots-l] suggestions needed, audio dropouts in sonar5 > >> >>> > >> >>> > >> >>>>I recently started working in Sonar 5 and I am having lots of audio > > drop > >> >>>>outs. The strange thing is that, these are the same projects that I > > was > >> >>>>working on in Sonar 4, except I didn't have any drop outs in Sonar 4. > >> >>>> I kept reading as to how much faster Sonar 5 was to Sonar 4 and I'm > >> >>>> finding quite the opposite. > >> >>>> Although, it was suppose to have migrated my settings from Sonar 4, > >> >>>> I > >> >>>> must have either changed something or it did not migrate properly. > >> >>>> I'm running out of ideas. Please help. > >> >>>> This is mostly for audio, haven't tried too much midi yet. > >> >>>> Which settings should I be aware of in Sonar 5 that may have changed > >> >>>> from Sonar 4? > >> >>>> HF > >> >>>> ** To leave the list, click on the immediately-following link:- > >> >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> >>>> ** If this link doesn't work then send a message to: > >> >>>> ** ddots-l-request@xxxxxxxxxxxxx > >> >>>> ** and in the Subject line type > >> >>>> ** unsubscribe > >> >>>> ** For other list commands such as vacation mode, click on the > >> >>>> ** immediately-following link:- > >> >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > >> >>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the > >> >>>> Subject:- faq > >> >>>> > >> >>>> > >> >>> ** To leave the list, click on the immediately-following link:- > >> >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> >>> ** If this link doesn't work then send a message to: > >> >>> ** ddots-l-request@xxxxxxxxxxxxx > >> >>> ** and in the Subject line type > >> >>> ** unsubscribe > >> >>> ** For other list commands such as vacation mode, click on the > >> >>> ** immediately-following link:- > >> >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > >> >>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the > >> >>> Subject:- faq > >> >>> > >> >> > >> >> ** To leave the list, click on the immediately-following link:- > >> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> >> ** If this link doesn't work then send a message to: > >> >> ** ddots-l-request@xxxxxxxxxxxxx > >> >> ** and in the Subject line type > >> >> ** unsubscribe > >> >> ** For other list commands such as vacation mode, click on the > >> >> ** immediately-following link:- > >> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > >> >> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the > >> >> Subject:- faq > >> >> > >> >> > >> > ** To leave the list, click on the immediately-following link:- > >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> > ** If this link doesn't work then send a message to: > >> > ** ddots-l-request@xxxxxxxxxxxxx > >> > ** and in the Subject line type > >> > ** unsubscribe > >> > ** For other list commands such as vacation mode, click on the > >> > ** immediately-following link:- > >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > >> > ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the > >> > Subject:- faq > >> > > >> > >> ** To leave the list, click on the immediately-following link:- > >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> ** If this link doesn't work then send a message to: > >> ** ddots-l-request@xxxxxxxxxxxxx > >> ** and in the Subject line type > >> ** unsubscribe > >> ** For other list commands such as vacation mode, click on the > >> ** immediately-following link:- > >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > >> ** or send a message, to > >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > >> > > > > ** To leave the list, click on the immediately-following link:- > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > > ** If this link doesn't work then send a message to: > > ** ddots-l-request@xxxxxxxxxxxxx > > ** and in the Subject line type > > ** unsubscribe > > ** For other list commands such as vacation mode, click on the > > ** immediately-following link:- > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > > ** or send a message, to > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq