[ddots-l] Re: Jaws problem

From: "WILLIAM QANAWATI" <williamqanawati@xxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Date: Thu, 17 Aug 2006 10:02:40 -0400

----- Original Message ----- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Thursday, August 17, 2006 4:27 AM Subject: [ddots-l] Re: Jaws problem


Hi George,
thanks for responding here is my answers afte each question you asked

The Nvidia drivers would be at the bottom of my suspect list
due to the fact that they are common throughout.

Freedom have very likely asked you this, but did you disable
all anti-virus software before installing?
I have no anti-virus software
Do you have
anything else like perhaps Windows defender loading at
startup?
no
Likewise, did you install as an administrator?
yes
William.

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of WILLIAM
QANAWATI
Sent: 17 August 2006 02:59
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Jaws problem

   Hi:
I got a new dual core computer with 2 GB of ram NVidia
GeForce 7300 GS video card after installing Window XP home I
installed Jaws V7.1 the latest version and other Jaws
versions but I have the same problem it's video intercept
Jaws is asking to install video intercept I do install but
no way after installing Jaws the window doesn't load
automatic it ask to choose normal or safe mode or last
configurations I spend hours with Freedom tech support but
they never face this problem and they don't know exactly
why?
they think maybe the video card is not compatible anybody
had this problem or know how we can fix it?
any help
please
William

----- Original Message -----
From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, August 15, 2006 10:04 AM
Subject: [ddots-l] Re: moving buses in Sonar 5

GUys:
In general, when you want to move items vertically in

Sonar, 15 pixels

seems to be the magic number. You can do the same thing

in the track

inspector to move effects up and down in a chain. I think

this stuff

could be documented as a tip for advanced users or

something. I'm also

getting david to formally support sfz since we all need a

viable sound

font;/sample player in Sonar. Gord ----- Original Message ----- From: "Kevin L. Gibbs" <kevjazz@xxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Tuesday, August 15, 2006 4:01 AM Subject: [ddots-l] Re: moving buses in Sonar 5
Phil,
thank goodness I have Sonar 3 on my laptop.  There's

where I

found out how to lock the mouse. Anyway, once I did

that, I tried

moving the buses up and down. Yes, you can move both up

and down in CT

using the ALT Shift numpad arrows. It takes about 4 up

clicks to move a

bus one row. Same with down clicks. Curiously, I had to

route JAWS to

PC which put the cursor at the extreme left corner of the

bus I wanted

to move. Using the JAWS cursor, I moved to the right

about four clicks

until I heard "m" in master. I then moved one click to

the left. JAWS

did not say "unknown." It just said "blank." I decided

I was at the

right place at that point so I locked the mouse and

pressed Alt Shift

down arrow four times and voila. When I unlocked the

mouse, the bus was

moved down one row. It turned out that I had changed the

cursor shape

option in my default.JCF file and not my Sonar JCF file.

Once I changed

it in Sonar JCF, JAWS said "unknown" one click to the

left of the first

letter in the name of a bus. Pressing Alt Shift up or

down numpad arrow

three or four times in any given direction would move the

bus one row

once the mouse button was unlocked. I have enough vision

to actually

see that the move doesn't occur until you unlock the

mouse, but it does

happen.
It's frightening the things I don't know about JAWS.  I

really

should get to know that sucker better.
I sometimes feel like I don't even belong on this team.
Nah, not really,

Kevin

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx

[mailto:ddots-l-bounce@xxxxxxxxxxxxx]

On Behalf Of Gordon Kent
Sent: Monday, August 14, 2006 5:09 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: moving buses in Sonar 5


Phil:
If you use the up and down arrows on the keypad instead

of the mid

section, it will work in CT. Gord ----- Original Message ----- From: "Phil Muir" <philmuir1@xxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Sunday, August 13, 2006 5:47 PM Subject: [ddots-l] Re: moving buses in Sonar 5

Hi HF. Yes, it can be done. Done it with the latest

JSonar scripts.

Not tried it with CT however, I would imagine doing this

in CT would

work
in the same way.  Things to be aware of.  From what I

can tell, there

is a
Sonar bug, the buses can only be dragged down. I have

tried dragging

buses up however, so far, no go. So, if you have a buss

at the bottom

that you want to be moved up to the top then, you would

need to drag

other
busses down until you have swapped them all around into

the right

order.
Now, here's how you do it. First of all you will need

to turn on the

Jaws's feature that tells you when the cursor has

changed shape. You

will
find it under cursor options. Then, go to the buss that

you wish to

move.
You would then, switch to the Jaws cursor and find the

buss's name.

Then,
just to the left of that, there must be a graphic or

something

because,
when you here Jaws say "unknown" then, you have landed

on the point

where
you can latch on to the buss to move it down. Now, lock

your left

mouse
button and use the Jaws mouse keystroke, Alts Shift and

midsection up

arrow to move the buss up. Note: you may ether need to

use the free

scripts or, no scripts at all as I suspect that the last

keystroke has

been disabled in CT. I seem to remember that was the

case in CT for

Sonar
4 and may be the case in CT for Sonar 5.
Not sure how many times you will need to use the Jaws

mouse up keys to

move the buss. Anyway, you could press the keystroke,

around 25 times

and
that should move the buss somewhere else. Then, unlock

the left mouse

button and check where the buss is.

Regards, Phil Muir
P J Muir Productions
Music and audio production
URL: www.philmuir.com/


----- Original Message -----
From: "HF" <hermanfermin@xxxxxxxxx>
To: <midimag@xxxxxxxxxxx>; <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, August 13, 2006 2:17 PM
Subject: [ddots-l] moving buses in Sonar 5

How do people move buses around in Sonar 5? Can you put

them in the

particular order that you want?
How is it done in either the free scripts or CT?
HF
** To leave the list, click on the

immediately-following link:-

**

[mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]

** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click

on the

** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to **

ddots-l-request@xxxxxxxxxxxxx with the

Subject:- faq
** To leave the list, click on the immediately-following

link:-

**

[mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]

** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click

on the

** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to **

ddots-l-request@xxxxxxxxxxxxx with the

Subject:- faq
** To leave the list, click on the immediately-following

link:-

**

[mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]

** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click

on the

** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following

link:-

**

[mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]

** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click

on the

** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following

link:-

**

[mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]

** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on

the

** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx

with the

Subject:- faq


** To leave the list, click on the immediately-following
link:-
**
[mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

References:
- [ddots-l] Re: Jaws problem
  - From: George Bell

[ddots-l] Re: Jaws problem

Other related posts: