Hi everyone: please ignore my posts on this, the bank change for multi in the motif es is 8129 for sonar convenience. I don't know why is isn't in the instrument def; but, I'm going to try and put it there. John Fioravanti ----- Original Message ----- From: <fioresq1@xxxxxxxxxxx> To: Jason Dasent <jdasent@xxxxxxxxxxx> Sent: Friday, January 26, 2007 2:31 AM Subject: Re: [midi-mag] changing the multis on the motif es from sonar > Can you change the multis in Sonar through a bank change? > ----- Original Message ----- > From: Jason Dasent <jdasent@xxxxxxxxxxx> > To: <fioresq1@xxxxxxxxxxx> > Sent: Friday, January 26, 2007 2:07 AM > Subject: Re: [midi-mag] changing the multis on the motif es from sonar > > > > Hi John, > > I use the mix editor when working with the motif and sonar. > > Jason > > ----- Original Message ----- > > From: <fioresq1@xxxxxxxxxxx> > > To: "Jason Dasent" <jdasent@xxxxxxxxxxx> > > Sent: Friday, January 26, 2007 1:22 AM > > Subject: Fw: [midi-mag] changing the multis on the motif es from sonar > > > > > > > Jason: I hope you don't mind me asking you this question privately. > I > > > know that you use the motif. Also, which sound editor do you use when > > > using > > > the Motif with Sonar to sets effects and the like. I have the mixer and > > > the > > > performance editor. Thanks in advance. John Fioravanti > > > ----- Original Message ----- > > > From: <fioresq1@xxxxxxxxxxx> > > > To: <midimag@xxxxxxxxxxx> > > > Cc: <ddots-l@xxxxxxxxxxxxx>; <motif-help@xxxxxxxxxxx> > > > Sent: Thursday, January 25, 2007 6:53 PM > > > Subject: [midi-mag] changing the multis on the motif es from sonar > > > > > > > > >> Hi: When using the Motif Es with Sonar, how can I get to the various > > > multis > > >> from within Sonar without changing them on the Motif itself? Thanks in > > >> advance. > > >> ----- Original Message ----- > > >> From: Jason Dasent <jdasent@xxxxxxxxxxx> > > >> To: <midimag@xxxxxxxxxxx> > > >> Sent: Thursday, January 25, 2007 5:49 PM > > >> Subject: Re: [midi-mag] HSC and lexicon. > > >> > > >> > > >> > Hi Jeff, > > >> > I only got the error message the first time I opened sonar after > > >> > installing hsc 7.6 It's working fine now. Also, I have made spots for > > > both > > >> > sonitus reverb as well as sfz. Let me know if any one wants them. > Also, > > >> can > > >> > you please tell me how to set up the cursor to be restored to where > it > > > was > > >> > after a spot is exicuted? Thanks again. > > >> > Jason > > >> > > > >> > ----- Original Message ----- > > >> > From: "Geoff Chapman" <gch@xxxxxxxxxxxxxxxx> > > >> > To: <midimag@xxxxxxxxxxx> > > >> > Sent: Thursday, January 25, 2007 1:59 PM > > >> > Subject: [midi-mag] HSC and lexicon. > > >> > > > >> > > > >> > > no. you must hold the left mouseButton down as you drag the slider > or > > >> > > knob. > > >> > > the knobs also work with the mouse, and you can drag up and down > for > > >> them > > >> > > to, even though they don't go up and down on screen. > > >> > > > > >> > > > > >> > > ----- Original Message ----- > > >> > > From: "Jason Dasent" <jdasent@xxxxxxxxxxx> > > >> > > To: <midimag@xxxxxxxxxxx> > > >> > > Sent: Thursday, January 25, 2007 7:45 AM > > >> > > Subject: Re: [midi-mag] To Jeff regarding HSC. > > >> > > > > >> > > > > >> > >> Hi Jeff, > > >> > >> When you say you use the mouse, do you just hold the mouse > and > > >> drag > > >> > > it > > >> > >> up or down to change values once you are on the parameter you want > > >> > >> to > > >> > >> change? Will that not move the mouse to a different part of the > > > screen? > > >> > >> Thanks again. > > >> > >> Jason > > >> > >> ----- Original Message ----- > > >> > >> From: "Geoff Chapman" <gch@xxxxxxxxxxxxxxxx> > > >> > >> To: <midimag@xxxxxxxxxxx> > > >> > >> Sent: Wednesday, January 24, 2007 2:44 PM > > >> > >> Subject: Re: [midi-mag] To Jeff regarding HSC. > > >> > >> > > >> > >> > > >> > >> > hi jason, > > >> > >> > firstly, are you using, sonar5 or 6? > > >> > >> > > > >> > >> > I configured it first with sonar4, had to make tweaks for the > > > lexicon > > >> > >> > reverb > > >> > >> > version in sonar5 as they tweaked things in that version, and I > > > don't > > >> > > own > > >> > >> > sonar 5 so testing was obviously less rigorous there. > > >> > >> > and who knows whether anything would work in sonar6. > > >> > >> > > > >> > >> > hmmm, as for question 1, > > >> > >> > what happens when you turn keyboard help on, jawsKey+top row > > >> > >> > number > > >> 1, > > >> > > and > > >> > >> > press the spot hotkeys control+1 through 9, and alt+1 through > 8. > > >> > >> > what does jaws say. > > >> > >> > > > >> > >> > if nothing, like if it just speaks the keys, perhaps the keyMap > > >> didn't > > >> > > get > > >> > >> > updated correctly, such that the keys for that lexicon set, > didn't > > >> get > > >> > >> > imported into the sonarX.jkm file? > > >> > >> > > > >> > >> > try hitting hscMods+f10, the actions menu, and hit k for keyMap > > >> > >> > refresh. > > >> > >> > > > >> > >> > and enter. and then try the keys again? > > >> > >> > > > >> > >> > > > >> > >> > as for question 2, yep I can tell you why there are 3 different > > > spots > > >> > > for > > >> > >> > each parameter. and yes, I know this makes it very annoying to > > >> utilize > > >> > >> > them > > >> > >> > from the hotspot list! <grin.> they obviously weren't intended > in > > >> this > > >> > >> > case > > >> > >> > to be driven that way. > > >> > >> > > > >> > >> > it's a fairly complex technical reason, and one which I think > now, > > >> has > > >> > >> > been > > >> > >> > largely negated, due to a new feature which enables you to > > >> > >> > overRide > > >> on > > >> > >> > a > > >> > >> > spot by spot basis, whether the mouse is returned to it's prior > > >> > >> > location > > >> > >> > after the spot has been executed. but when I built this, that > > > wasn't > > >> > >> > possible on a spot per spot basis. > > >> > >> > so, I had to make 3 spots: one for locating the given slider or > > > knob, > > >> > > and > > >> > >> > if > > >> > >> > slider, it's position anywhere in the travel, then that chains > to > > >> > > another > > >> > >> > spot which then reads the absolute value of that > slider/parameter, > > >> > >> > which > > >> > >> > is > > >> > >> > displayed onscreen elsewhere, and then the third spot, as it's > > >> > >> > name > > >> > >> > suggests, is to relocate, the mouse back on the slider again, > back > > > to > > >> > >> > where > > >> > >> > it was the first time, in order to, A.) speak a percentage of > that > > >> > > slider > > >> > >> > position, of the one's that have sliders, which is only about > the > > >> first > > >> > > 6 > > >> > >> > of > > >> > >> > them, > > >> > >> > and to then allow you to grab the mouse and operate that slider > in > > >> > >> > realTime. > > >> > >> > > > >> > >> > there. you see? now you wished you hadn't asked don't you! he > he! > > >> > >> > > > >> > >> > I could probably streamline that down to two spots per parameter > > > now, > > >> > > that > > >> > >> > we have a spot per spot restore cursor position overRide > ability. > > >> but, > > >> > > ... > > >> > >> > yeah, just haven't done that eh. > > >> > >> > > > >> > >> > BTW, does control+alt+tab and control+alt+shift+Tab, spotRing > > >> feature, > > >> > >> > work > > >> > >> > for you? does that fly you around the 17 spots at present? > > >> > >> > > > >> > >> > 3. as for the tutorial, well, hmmm, guess I can put it up on > > >> sendspace > > >> > >> > where > > >> > >> > it'll remain for 7 days. here is the link. it's not that good > > > though. > > >> > >> > > > >> > >> > > > >> > >> > http://www.sendspace.com/file/xsw362 > > >> > >> > > > >> > >> > not as good as your stuff. > > >> > >> > > > >> > >> > as for the file list being corrupted message, hmmm, that usually > > >> > >> > happens > > >> > >> > when there is a mismatch between the set list within the main > hsc > > >> file, > > >> > >> > and > > >> > >> > the file names that actually exist for those sets. > > >> > >> > zip me up your whole personalized settings directory, or, if you > > >> wanna, > > >> > >> > just > > >> > >> > all the hsc pluggin sets that you've done, including your > > > sonarX.hsc > > >> > > main > > >> > >> > application file, and flip them to me, and I'll have a look for > > > you. > > >> > >> > > > >> > >> > that part of the business, deleting and editing set name indexes > > > and > > >> > >> > stuff, > > >> > >> > is still a bit squirly/backDoorish at present, i.e. not > elegantly > > >> > > treated > > >> > >> > in > > >> > >> > the front end UI. > > >> > >> > > > >> > >> > <midimag@xxxxxxxxxxx> > > >> > >> > Sent: Thursday, January 25, 2007 4:21 AM > > >> > >> > Subject: [midi-mag] To Jeff regarding HSC. > > >> > >> > > > >> > >> > > > >> > >> >> Hi Jeff, > > >> > >> >> If I may ask 1 more question. I installed HSC 7.6 with no > > >> > > problems. > > >> > >> >> However, When I opened sonar, I got a message saying that the > > >> > >> >> file > > >> > >> >> list > > >> > >> > was > > >> > >> >> currupted? However, this was only the first time I opened sonar > > >> after > > >> > >> >> installing hsc. Can you please explain why this happened? And > if > > > it > > >> is > > >> > >> >> important? Thanks a lot. > > >> > >> >> Jason > > >> > >> >> > > >> > >> >> > > >> > >> >> To unsubscribe, send a message to: > > >> > >> >> midimag-unsubscribe@xxxxxxxxxxx > > >> > >> >> http://www.midimag.org/ > > >> > >> >> > > >> > >> > > > >> > >> > To unsubscribe, send a message to: > midimag-unsubscribe@xxxxxxxxxxx > > >> > >> > http://www.midimag.org/ > > >> > >> > > > >> > >> > > > >> > >> > -- > > >> > >> > No virus found in this incoming message. > > >> > >> > Checked by AVG Free Edition. > > >> > >> > Version: 7.5.432 / Virus Database: 268.17.8/648 - Release Date: > > >> > > 1/23/2007 > > >> > >> > 11:04 AM > > >> > >> > > > >> > >> > > > >> > >> > > >> > >> > > >> > >> To unsubscribe, send a message to: midimag-unsubscribe@xxxxxxxxxxx > > >> > >> http://www.midimag.org/ > > >> > >> > > >> > > > > >> > > To unsubscribe, send a message to: midimag-unsubscribe@xxxxxxxxxxx > > >> > > http://www.midimag.org/ > > >> > > > > >> > > > > >> > > -- > > >> > > No virus found in this incoming message. > > >> > > Checked by AVG Free Edition. > > >> > > Version: 7.5.432 / Virus Database: 268.17.10/651 - Release Date: > > >> 1/24/2007 > > >> > > 6:48 PM > > >> > > > > >> > > > > >> > > > >> > > > >> > To unsubscribe, send a message to: midimag-unsubscribe@xxxxxxxxxxx > > >> > http://www.midimag.org/ > > >> > > >> > > >> To unsubscribe, send a message to: midimag-unsubscribe@xxxxxxxxxxx > > >> http://www.midimag.org/ > > > > > > > > > > > > -- > > > No virus found in this incoming message. > > > Checked by AVG Free Edition. > > > Version: 7.5.432 / Virus Database: 268.17.10/651 - Release Date: > 1/24/2007 > > > 6:48 PM > > > > > > ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq