[ddots-l] Re: CakeTalking not talking
- From: "Kevin L. Gibbs" <kevjazz@xxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Wed, 14 Mar 2007 23:30:53 -0700
Change your FA66 back to 48K and see if CT comes back up. If it does,
change your sample rate in Sonar to 44.1 BEFORE changing the FA66 back to
44.1 and see if you then still have Sonar and CT working.
K.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Luis Elorza
Sent: Wednesday, March 14, 2007 8:53 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: CakeTalking not talking
did you try ctrl f12?
can you open the inspector?
and are you sure your track view is not minimized?
did you try opening different projects?
----- Original Message -----
From: "Phil Halton" <philhalt@xxxxxxxxxxx>
To: "ddots-l" <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, March 14, 2007 5:16 PM
Subject: [ddots-l] CakeTalking not talking
>I have a problem wherein cake talking scripts are loaded (as reported
>by
>pressing insert+Q), but none of its functions work. I.?E., refresh with
>F6, the skip to track/field hotkeys etc.
>
> Everything was fine until I did the following:
>
> Wanting to see the difference in sound quality with higher sampling
> rates,
> I switched my FA-66 sample rate to 48khz from 44.1khz, Cycled the power as
> suggested by edirol for the new rate to take effect, and started up sonar.
> I checked audio options in sonar and it recognized and listed the new
> sample rate on the general page of audio options(I'm using ASIO driver
> mode, so I didn't have to do any wave profiling etc) . I recorded a
> track, played it back to see how much better 48khz would sound compared to
> 44.1khz and what I heard was total chaos--like clipping on steroids.
>
> So, I tried backing off the gain on the mic and re-recorded--same
> result.
> Figuring it was something to do with the new sample rate, I closed sonar,
> reset the fa66 to 44.1khz, and started sonar again.
>
> That's where the trouble began. I tried refreshing the screen with f6
> and
> nothing. I tried moving to a column with the shift numpad keys, and got a
> message of "no hot key". I rebooted the system figuring I really fried
> something in the OS, but upon reboot, the same problem persists.
>
> So now, although cakeTalking is loading with sonar, its not
> functioning--as though it wasn't loaded.
>
> I won't worry about the sampling rate problem right now, I'd just like
> to
> get CakeTalking back again. Any help or suggestions?
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
