[ddots-l] Re: Accessing the drum banks of TTS1
- From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 3 Apr 2006 22:24:33 +0100
If you go to the MIDI track of the TTS1 and do the following. Set the bank to
0 and the MIDI channel to 10. Then, arrow over to the patch column. You
should be able to access the drum patches for the TTS1 by pressing the enter
key and using the down arrow key to get to each patch. You will of course have
to press the enter key again after arrowing to the patch number.
Regards, Phil Muir
P J Muir Productions, Music and audio production,
Mixing, Mastering: www.philmuir.com/
----- Original Message -----
From: Stephanie Pieck
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, April 03, 2006 9:31 PM
Subject: [ddots-l] Accessing the drum banks of TTS1
Hi,
I understand how to add tracks using the TTS1 synth to a project, but can
anyone explain how to access its drum banks and create a track for them so I
can add percussion to projects? Thanks
Stephanie
Other related posts:
