Rob, The manual that is on the Flash Card that came with the BP talks about the 7+8+9 find command. The documentation that was installed on my PC with the transfer software does not mention the 7+8+9 command. It only mentions the F cord, which does work fine on my BP. I haven't checked the tape or Braille manuals. Would you like me to E-mail you a copy of the manual file that came on my BP Flash Card so that you can see what version is shipping with new Book Ports? Thanks, Scott ----- Original Message ----- From: "ROB MEREDITH" <rmeredith@xxxxxxx> To: <bookport@xxxxxxxxxxxxx> Sent: Monday, March 21, 2005 1:17 PM Subject: [bookport] Re: bookport Re: Strange Behavior > Scot: > Apparently, 7+8+9 is not in the release firmware. We need to figure out > how you got a newer manual. > > Rob Meredith > > >>> sduck@xxxxxxxxx 03/21/05 11:22AM >>> > Sarah, > The 7+8+9 find command is in the manual that came with my BP so I > wouldn't > think that it is just part of the beta. > Thanks, > Scott > ----- Original Message ----- > From: "Sarah Cranston" <cranston.sarah@xxxxxxxxxxxxxxxxx> > To: <bookport@xxxxxxxxxxxxx> > Sent: Monday, March 21, 2005 9:38 AM > Subject: [bookport] Re: Strange Behavior > > > > Scott, > > You can't access the new find command, 7+8+9, because, I believe, it > is = > > part of the new beta. > > As for your second question, try creating a folder with the Transfer > = > > Tool. (I'd call it "bible" or something like that.) Then transfer > your = > > text file into that folder and see if it works. > > > > HTH > > > > Sarah > > > > -----Original Message----- > > From: bookport-bounce@xxxxxxxxxxxxx > > [mailto:bookport-bounce@xxxxxxxxxxxxx]On Behalf Of Scott Duck > > Sent: Monday, March 21, 2005 9:29 AM > > To: Book Port Discuss > > Subject: [bookport] Strange Behavior > > > > > > Hi Everyone, > > Over the weekend, I noticed a couple of strange things about my BP. > = > > When I try to enter text to find by pressing 7+8+9, nothing happens. > I = > > can use 7+9 to mark the beginning and end of a string of text to find > = > > and it works fine. Also, I have a King James Bible, stored in a text > = > > file that is a little more than 4MB. I transferred the file to the > BP = > > and, on the BP, the file stops before it should, in Revelation 4. > This = > > is probably about 96 or 97% of the file. I transferred the file > again = > > and got the exact same result. Does anyone know what could be > causing = > > the problems? I am running version 1.6.0.0 of the transfer software > and = > > my BP firmware version is 01.02.00. The software tells me that there > = > > are no updates for the transfer software or the BP firmware. > > Thanks, > > Scott > > > > > > > > > >