[bookport] Re: Firmware Beta 2.1.0.1 Available
- From: "Walt Smith" <WSmith@xxxxxxxxxxxxxxxxxxxxx>
- To: <bookport@xxxxxxxxxxxxx>
- Date: Thu, 30 Jun 2005 14:05:40 -0400
No, the paste command is the entire row - *+0+#
-----Original Message-----
From: bookport-bounce@xxxxxxxxxxxxx
[mailto:bookport-bounce@xxxxxxxxxxxxx] On Behalf Of Sandy Licht
Sent: Thursday, June 30, 2005 1:09 PM
To: bookport@xxxxxxxxxxxxx
Subject: [bookport] Re: Firmware Beta 2.1.0.1 Available
I read that, but what are the different key strokes?
At 11:51 AM 6/30/2005, you wrote:
>Move File
>
>While using Book Port, you may occasionally find you wish to move a
file
>from one folder to another. You may have accidentally placed the file
>into an incorrect folder, or you may realize after reading the book,
>that you would like to keep the book around for reference purposes.
>
>Cut File: *+#
>
>Use the Cut File command to mark a file that you wish to move. When you
>press the Cut File command, Book Port responds, "Move" and takes note
of
>the location of that file in preparation for the next steps you will
>take to complete the moving process.
>
>If you attempt to cut a file that is locked, the unit reports, "File
>Locked" and does not put the file's name and location information into
>its location
>memory.
>
>Pase File: *+0+#
>
>Once you have used the Cut File command to mark a file for movement,
use
>the navigation keys to open the folder where you wish to place the file
>you marked. Once you move to the desired folder, use the Paste File
>command to move the file from its origital location to the new
location.
>When you press the Paste File command, Book Port moves the file and
>responds, "File Moved."
>
>Note that you cannot move files from the Notes folder.
>
>-----Original Message-----
>From: bookport-bounce@xxxxxxxxxxxxx
>[mailto:bookport-bounce@xxxxxxxxxxxxx] On Behalf Of Sandy Licht
>Sent: Thursday, June 30, 2005 12:44 PM
>To: bookport@xxxxxxxxxxxxx
>Subject: [bookport] Re: Firmware Beta 2.1.0.1 Available
>
>I hate to sound dumb, but... what are the cut and paste commands. I
>mean,
>what are the keys?
>
>At 11:15 AM 6/30/2005, you wrote:
> >In addition to a couple of minor bug fixes, this beta adds the new
Move
> >File command.
> >
> >Details are at www.aph.org/beta/bpx_new.htm
>
>Sandy Licht
>Phone: 409-898-8218
>Jeremiah 29:11 - 14A
>11For I know the plans I have for you," says the LORD. "They
>are plans for good and not for disaster, to give you a future and a
>hope.
>12In those days when you pray, I will listen. 13If you look for me in
>earnest,
>you will find me when you seek me. 14I will be found by you," says the
>LORD...
Sandy Licht
Phone: 409-898-8218
Jeremiah 29:11 - 14A
11For I know the plans I have for you," says the LORD. "They
are plans for good and not for disaster, to give you a future and a
hope.
12In those days when you pray, I will listen. 13If you look for me in
earnest,
you will find me when you seek me. 14I will be found by you," says the
LORD...
Other related posts:
