Hi Michael, Are you the guy who bought the body molds from Phil Gurile? If so, could you please call me @ 513-932-1138? As far as springs are concerned, I've gone radical on my SR7. I really screwed up the handling for awhile, but it's almost back in balance now using more than 2:1 frt/rr ratio. Rubbing blocks are your friends! Thanks, Barney Powers ----- Original Message ----- From: "Michael Rankin" <michael@xxxxxxxxxxxx> To: "bobsy talk" <bobsy_talk@xxxxxxxxxxxxx> Sent: Saturday, January 7, 2012 2:24:14 PM Subject: A Bobsy Talk Email: Springs OK all you experts. Bobsy sr6, front springs. What is the correct rate? I currently have carrea coil over shocks with 250lb springs. Under hard braking from high speed the front chassis bottoms out. Any ideas? Thanks Michael Rankin =========Thanks for being a subscriber to Bobsy Talk email. Be sure to also check the regular Bobsy website from time-to-time at www.BobsyRegistry.com. >>To see an archive of past Bobsy Talk emails at www.freelists.org/archive/bobsy_talk/. >>To unsubscribe to Bobsy Talk go to www.freelists.org/list/bobsy_talk and change box to "unsubscribe." ========= =========Thanks for being a subscriber to Bobsy Talk email. Be sure to also check the regular Bobsy website from time-to-time at www.BobsyRegistry.com. >>To see an archive of past Bobsy Talk emails at www.freelists.org/archive/bobsy_talk/. >>To unsubscribe to Bobsy Talk go to www.freelists.org/list/bobsy_talk and change box to "unsubscribe." =========