[bksvol-discuss] Re: word hypenated between lines
- From: "Pratik Patel" <pratikp1@xxxxxxxxx>
- To: <bksvol-discuss@xxxxxxxxxxxxx>
- Date: Fri, 4 Mar 2005 09:22:51 -0500
Paula,
If you haven't changed the default settings, then automatic corrections are
applied for you when you scan and recognize the document. You only would
need to apply automatic corrections if you have a document that you're
certain has not gone through the process.
Pratik
Pratik Patel
Interim Director
Office of Special Services
Queens College
Director
CUNY Assistive Technology Services
The City University of New York
ppatel@xxxxxx
_____
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Paula and James
Muysenberg
Sent: Friday, March 04, 2005 8:52 AM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: word hypenated between lines
Is it also necessary to enable Apply Corrections with documents we scan
in K1k, or does the program do that automatically?
Paula
----- Original Message -----
From: Guido Corona <mailto:guidoc@xxxxxxxxxx>
To: bksvol-discuss@xxxxxxxxxxxxx
Sent: Friday, March 04, 2005 7:25 AM
Subject: [bksvol-discuss] Re: word hypenated between lines
Yes Elizabeth, with Kurzweil you should be able to get mostwords repaired
automatically. First you need to ensure that the automatic end of line
hyphen correction is enabled in settings/general.
Then once enabled, save in all your settings files. Now go to tools/apply
corrections and press enter. Automatic corrections will be applied to the
entire document, including end of line repair for words split by
end-of-line soft-hyphens.
After this operation you will discover that there are very few words split
at end of line. You will still need to look for hypen followed by space,
because the repair mechanism is not yet 100% perfect.
Guido
Guido Dante Corona
IBM Accessibility Center, Austin Tx.
Research Division,
Phone: 512. 838. 9735.
Email: guidoc@xxxxxxxxxxx
Web: http://www.ibm.com/able
"E." <thoth93@xxxxxxxxxxxxx>
Sent by: bksvol-discuss-bounce@xxxxxxxxxxxxx
03/04/2005 06:47 AM
Please respond to
bksvol-discuss
To
bksvol-discuss@xxxxxxxxxxxxx
cc
Subject
[bksvol-discuss] word hypenated between lines
I am validating a book where a lot of words are split up with hyphens from
one line to another. Is there some way to put the word together on one
line with hyphen? I want a command within k1000 so I do not have to go
through the book and do each one by hand.
E.
Other related posts:
