Robert et al, Generally when you use the gray scale setting, you will not need to change the brightness. it should not matter what setting you use. Prat Pratik Patel Interim Director Office of Special Services Queens College Director CUNY Assistive Technology Services The City University of New York ppatel@xxxxxx _____ From: bksvol-discuss-bounce@xxxxxxxxxxxxx [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of robert tweedy Sent: Wednesday, February 02, 2005 11:51 PM To: bksvol-discuss@xxxxxxxxxxxxx Subject: [bksvol-discuss] junk at the bottom of the page I did several test today with kurzweil 9.02 and the best was grey scale and the brightness at 50. In fact did a few test using the control/F9 and on a different setting encounter the J or I 4 times while doing 20 pages at a time using fine reader. Not bad for both settings I did. Tried Shellie's suggestion and not bad there either.