Jake, thank you so much! I will keep this for future reference. <Smile>
Jana
Reposting for Jana...hope this helps, its what showed up in my archive
----- Original Message ----- From: "Donna Smith" <donnafsmith@xxxxxxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Wednesday, January 05, 2005 9:57 PM
Subject: [bksvol-discuss] Scanning with FineReader, long
share,Hi all, and a very happy new year! I was out of pocket yet again, having house guests for a week and then there was all that holiday cheer toofbut I have mostly caught up with messages and am ready to present scanning with FineReader 101. Excuse me just a minute while I don my Mistress of FineReader gear. Ah yes, spike-heeled boots in place...now where did I put that whip?? <grin>
My standard disclaimer: I am not now, nor have I ever been, a software developer, a technology specialist, or a student in any formal sense of computers. So to all you computer geeks out there, and you know who you are, don't get excited when I use lay terms to discuss something insteadongeek lingo. Don't make me have to find my whip!
As with other scanning software, it's all in the options and how you set them. What I describe below are my typical settings for scanning in two-page mode, regular print, straight text, with the book fitting nicelythe scanner bed. Any setting can be changed or tweaked to produceslightlythendifferent results, but this is the base from which I usually start.
Open FineReader and go to the tools menu by pressing alt for menus andT for tools. This will probably put you on the spell-check selection.you
Press O for options and you will find yourself in a dialogue box with six
groups of settings to muck around with. These six groups are: 1. general
page; 2. view page; 3. scan open image page; 4. recognition page; 5. check
spelling page; and 6. formatting page. Now the fun begins.
In each group of settings above, you have choices to make, check boxes to check or uncheck, a myriad of little things that will fine tune the scanget, and when you learn what they all can do for you, you will find thatthat
your life as a scanner and the lives of all of our validator friends will
suddenly become much better. I urge you to really explore all of these
options on numerous occasions until they begin to make sense and you begin
to understand their purpose. There's nothing that can be done in this
dialogue box that can't be undone. The worst thing that will happen isyou get a really lousy scan because you chose the wrong combination ofI'll
settings for that particular book. The best thing that can happen is that
you learn your software and produce really excellent scans.
So now I'll go through each group of settings one at a time, giving the settings I use for the typical scan mentioned above. Under each group,yourlist the options available and then the settings that I use.
1. General page: A. Interface language, English B. Show image during scanning, check box checked C. Show tips during recognition, check box not checked D. Open last batch at start-up, check box checked E. Adjust image to fit printable area while printing, not checked F. Show welcome dialogue at start-up, not checked G. Enable ABBYY community news channel, not checked H. Save button I. Load button J. Use defaults button K. Close button. (Note: For now, we'll do nothing with H through K.)
2. View Page A. Appearance item, Uncertain character B. None button. C. Block frames width, 1 D. Show black and white images in image window, not checked E. Show black and white images in zoom window, not checked F. Show zoom windows scroll bars, checked G. Show scale black and white images as gray, checked H. Highlight uncertain characters, checked I. Show nonprinted characters in window, not checked J. Switch to full page mode, checked. K. Drafter editor font size, 12 L. Close button.
3. Scan Open Image Page A. Scanner twain driver, Epson Twain 5 (of course needs to be set forarescanner) B. Use FineReader interface, checked, (very important) C. Display options dialogue before scanning, not checked D. Scanner settings button (pressing enter here will open yet another dialogue box, but one that is pretty important. So press enter and herebutton.my settings) I. Image orientation, landscape II. Measure units, inches III. Paper size, letter IV. Brightness automatic, checked V. Pictures scanning mode, black and white pictures VI. Resolution, 300 VII. Pause between pages, checked (and for some reason, this has to be checked every time you scan no matter how you save the settings.) VIII. Edit box for seconds to pause, 5 IX. Show this dialogue box before scanning, not checked X. Okay button XI. Cancel button (Note; pressing okay after setting your options will return you to the original dialogue box and back to the D. option of scanner settingsSo now we'll resume going through the third group of options under scanopenweimage page.) E. Invert image, not checked F. Despeckle image, not checked G. Split dual pages, checked (very important) H. Detect image orientation during scanning, checked I. Convert color and gray images to black and white, not checked J. Ask for page number before adding page to batch, not checked K. Open image during scanning, checked L. Close button.
4. Recognition Page A. Recognition language, English B. Edit languages C. Auto detect layout, checked D. Clear background noise, checked E. Look for bar codes, not checked F. Auto detect, checked G. One line of text per cell, not checked H. No merged cells in table, not checked I. Do not use user patterns, checked J. Pattern editor button K. Close button
5. Check Spelling Page A. Stop at words with uncertain characters, checked B. Stop at words not found in dictionary, checked C. Stop at compound words, not checked D. Ignore words with digits and other non-alphabetic characters, checked E. Skip prompting for word forms (English dictionary only), checked F. Correct spaces before and after punctuation marks, checked G. Error display level set before recognition, standard H. View dictionaries button I. Browse button J. Close button
6. Formatting Page
A. Retain font and font size, checked
B. Keep pictures, not checked
C. Serif, Times New Roman
D. Sans seriff, Arial
E. Monospaced, Courier New
F. Format settings button, (this is another important one, so press enter
and here's what you get)
I. RTF docs word xml tab
II. Default paper size, letter
III. Automaticly increase paper size, checked
IV. Keep page breaks, checked, (super-mega important)
V. Keep line breaks, not checked (also pretty darn significant)
VI. Retain text color, not checked
VII. Remove optional hyphens, checked (another major time-saver)
VIII. Enable FineReader zoom Window in Microsoft Word 2003 only for word xml format, not checked IX. With text color, not checked X. With background color, not checked XI. Save in Word 97 or later format, checked XII. JPEG, checked XIII. JPEG quality, 50 XIV. Reduce picture resolution to, 150 XV. Okay button XVI. Cancel button (Note: after making selections, press OK and you will be returned to the regularly scheduled program which was the formatting page.) G. Close button
At this point, use control-tab to take you back to the general page wherestarted this odyssey. Tab over until you get to save. Press enter andnamethis settings file, preferably something that will make sense when you trymode
to remember it later. Then tab over to the nearest close button and press
enter. You will now be ready to scan, or you can close out FineReader and
return later with the settings saved.
When you open FineReader again and are ready to scan a book in two-pagethewith no extra frills, press alt, T and O to get back to the options under the tools menu, control-tab until you land on general page, tab over toload button, press enter and type in the name of the settings file youto
created, and press enter. You will then need to control tab to the scan
open image page, tab to the scanner settings button, press enter, tab over
and check pause between pages and tab again to set the number of secondsnot5. Tab to close and press enter, tab to close again and press enter, and then you're ready to scan.
Taken all at once like this it might appear a lot to do, but it's reallyonce you get the settings in place. I've created similar settings forit.
one-page scanning for that occasional book that is too large for two-page
mode, and another one for retaining line breaks for the occasional book of
poetry or some other text where saving the line breaks might be important.
But the one I use the most is the two-page mode settings. The other
frequent change I make is for paper size. If the book really fills up the
scanner bed, then A4 is a better setting than letter, but I make this
adjustment for each scan.
Control-shift-K starts continuous scanning and pressing space interruptsoption
Control-shift-R starts the recognition process.
When you're done with scanning and recognition, and it's time to save your
work, here's how to do it:
Press alt and then F to get to the file menu. Press E to go to the save
text as dialogue box. This is a baby dialogue box compared to the options
one, so pressing tab will get you through it. Set your options for saving
text as follows:
1. Filename, type in what you want. The default is Untitled0.
2. Save as type, rich text format RTF. (This is crucial if for no other
reason than to keep the volunteers on this list happy! <smile> Seriously
though, it is the best option and it is the second selection as you arrow
down the combo box.)
3. Save button
4. Cancel button
5. All pages, checked, this is the second option in this combo box.
6. File options, create a single file for all pages, checked, fourththein the combo box. 7. Retain layout, retain font and font size, checked, second option insetcombo box. 8. Keep pictures, not checked. 9. Open document after saving, not checked 10. Format settings button, this is a repeat of the format settings youin the earlier tools menu settings. You can press space here to checkyoursettings, but it's really not necessary.press
11. Save in, select whatever folder you choose for saving scans, I use my
ebooks.
12. List view, let's you select files or folders, but nothing to set.
Once you've made the selections above, tab over to the save button andbox,space to save. Now you have a lovely scanned book in RTF to submit to BookShare. Once you've set these options in the save text as dialoguethey remain the same until you change them again, so in future, you only have to put in the filename and tab over to save.
Happy scanning! I still say FineReader is the best scanning software out there! And remember, it's not wise to disagree with the Mistress of FineReader! <smile>
Peace and Hope,
Donna