Robert:
Just thinking out loud here: if one started with 12% and ran it through an
electrophoric column to get an "electrophoretically pure" start solution,
then processed in the usual manner up to 85-90%, followed by freezing of
remaining water up to the desired concentration, would one not then end up
with a nearly pure mix of peroxide and water?
Bill
On Thursday, September 1, 2016, <qbert@xxxxxxxxxxxxxxx> wrote:
It's very unlikely you would ever get a great deal of peroxide from it as
when water is added the PH of the solution becomes alkaline which allows
the peroxide to disassociate very quickly on most any organic material. The
possible way around this would be to add it to a acidic based water to get
the PH below 6. However you still have major contaminates to reduce out
before you would even attempt to concentrate this. Being restricted to12%
aqueous H2O2 In the UK is going to make it tough for you to get any
reasonable amount of rocket grade peroxide
Robert
At 09:30 AM 9/1/2016, you wrote:
Greetings,
Sodium Carbonate Peroxide is sold in the UK (and most likely in other
teritories too) as "Vanish" laundry detergent. It can also be had at low
cost from chemical suppliers.
Apparently it is about 27-30% H2O2. Does anyone know the alchemy required
to extract the H2O2? I have read various conflicting accounts of how to do
it.
Carl. (British Reaction Research).
