Re: [ARMini-support] >L>SAR Linux Micro SD card
- From: A Rawnsley <rcomp@xxxxxxxxxxx>
- To: armini-support@xxxxxxxxxxxxx
- Date: Tue, 28 Mar 2017 11:38:14 GMT
In message <40c5812356.Brian@xxxxxxxxxxxxxxxxx>
Brian Howlett <brian@xxxxxxxxxxxxxxxxxx> wrote:
Hi.
I purchased a Linux Micro SD card from >L>SAR, thinking it would come
with at least a minimal set of instructions for fitting it. It didn't.
Do I assume that it replaces the card already fitted in this
TiMachine?
I'm afraid you'd need to contact Elesar for support on their product
(especially as we have offer our own, supported, "Graphical Linux" product
for Titanium/TiMachine for quite a while now), but I can confirm that the
Linux card is meant to fit in the micro-SD slot at the rear-left of the
motherboard.
With a little care, you can remove the 4 motherboard screws and slide the
board gently forward (with an anti-clockwise twist) without needing to
completely disassemble the machine. This will provide access to the
micro-SD slot.
Andrew
--
R-Comp
22 Robert Moffat, High Legh, Knutsford, Cheshire WA16 6PS
Tel: 01925 755043 Fax: 01925 757377
http://www.rcomp.co.uk
---
To alter your preferences or leave the group,
visit
//www.freelists.org/list/armini-support
List-related queries to info@xxxxxxxxxxxx
Other related posts: