[argyllcms] Re: scanin error opening tif
- From: Alex Jamison <a539jamison@xxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Mon, 20 May 2013 20:16:30 -0400
Hello Graeme,
I'm starting with the XRite data, and made the changes you mention, but got
this message:
"scanin: Error - File 'ColorCheckerSG.txt' no sets of data in first table"
The txt file begins this way, so I don't see the problem:
IT8.7/2
ORIGINATOR "Graeme Gill"
DESCRIPTOR "Header to prepend to X-Rite digital_colorchecker_sg_l_a_b.txt file"
CREATED "June 26, 2012"
NUMBER_OF_FIELDS 4
BEGIN_DATA_FORMAT
SAMPLE_ID LAB_L LAB_A LAB_B
END_DATA_FORMAT
NUMBER_OF_SETS 140
BEGIN_DATA
A1 96.55 -0.91 0.57
A2 6.43 -0.06 -0.41
A3 49.7 -0.18 0.03
A4 96.5 -0.89 0.59
Thank you,
Alex
On May 20, 2013, at 7:27 PM, Graeme Gill wrote:
> Alex Jamison wrote:
>> H'mm. I tried the first step: txt2ti3 ColorCheckerSG.txt ColorCheckerSG
>
> That assumes you measured your chart. Is that what you did, or did you
> download the reference from X-Rite ?
>
> If the latter, then you need to edit it to add the header and footer
> rather than using txt2ti3 & spec2cie, as per the instructions.
>
> Graeme Gill.
>
Other related posts:
