Bravo, and thank you a lot for this software I have a spyder 2 colorimeter ( whith colorvision colorplus) ,( maybe not the same as the spider 2 express?? ) On my destop computer with a pro 454 iiyama CRT monitor, all is ok after installing libusb-win32 On the netbook and externall lcd monitor , measurements are sometimes wrong. Dispcal -yl -R (or -r) is fast and ok , with always same measures. But dispcal -yl -v-o esai gives unstable and curious results: Check all : Current Brightness = 0.00 Target 50% Level = -1.#J, Current = 0.00, error = -1.$% Target Near Black = 0.00, Current = 0.00, error = -1.$% Current white = x 0.0000, y 0.0000, VDT 48718K DE 1.$ Target black = x 0.0000, y 0.0000, Current = x 0.0000, y 0.0000, error = 1.#R DE After some try , check all is ok ,if it is the first choice (5) after starting dispcal Check all: Black = XYZ 0.89 0.94 0.93 Grey = XYZ 6.19 6.43 6.22 White = XYZ 72.84 76.56 68.68 1% = XYZ 1.77 1.84 1.69 Current Brightness = 76.56 Target 50% Level = 14.51, Current = 6.43, error = -10.5% Target Near Black = 0.77, Current = 1.88, error = 1.5% Current white = x 0.3340, y 0.3511, VDT 5401K DE 1.7 Target black = x 0.3340, y 0.3511, Current = x 0.3341, y 0.3474, error = 2.91 DE But if the first choice after starting dispcal is 1 to 4, I get the bad result With the choice 1, the first measurements are wrong 1) Black level (CRT: Offset/Brightness) Doing some initial measurements Black = XYZ 0.00 0.00 0.00 Grey = XYZ 0.00 0.00 0.00 White = XYZ 0.00 0.00 0.00 Adjust CRT brightness to get target level. Press space when done. Target 0.00 /Current 0.00 = \Current 0.00 = /Current 0.00 = \Current 0.00 = /Current 432085.45 \ Current 0.93 -08 - same type of problems whith choice 2,3,4.. I read the similar thread of December on spyder 2 , without finding a clear solution thank you for help