[argyllcms] Re: Support for AJA devices, etc.
- From: Richard Kirk <richard@xxxxxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Wed, 27 Aug 2014 14:56:25 +0100
On 27 Aug 2014, at 14:00, Graeme Gill wrote:
> Richard Kirk wrote:
>
>> It would be good if we could use the Argyll utilities with some 'dispwin'
>> setting that
>> allowed us to pass the calibration RGB to some other application that talked
>> to the
>> device. For example, if we had...
>>
>> dispwin -f <file>
>>
>> ...then instead of displaying each colour patch, it would write the RGB
>> values to
>> <file> as a string of floating-point numbers, and then blocked until <file>
>> disappears.
>
> Hi,
> doesn't "dispcal/dispcal -C command" come close to that ?
Thanks. Quite right, so it does. I thought I had gone through all the options,
but
I seem to have missed the significance of -C. Leastways, I can have a go.
Thanks.
Richard Kirk
---
FilmLight Ltd, Artists House, 14-15 Manette Street, London W1D 4AP
Tel: +44 (0)20 7292 0400 Fax: +44 (0)20 7292 0401
Other related posts:
