[argyllcms] Dispcalgui and "Measure" buttons

  • From: Jari Jylhä <jarij@xxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Mon, 21 Jun 2010 07:45:29 +0300

Measure buttons don't work with Colormunki Photo. Dipcalgui waits 30 seconds and then says "Error". 


Debian Lenny 64-bit
Argyll 1.1.1 compiled from source
Dispcalgui 0.3.3.9 installed with autopackage

Spotread works on command line.

Here is dispcalGUI.log
2010-06-21 07:21:20,753 =============================================================================== 
=
2010-06-21 07:21:20,814 Starting up...
2010-06-21 07:21:20,817 Enumerating display devices and communication ports... 
2010-06-21 07:21:21,019 ...ok.
2010-06-21 07:21:21,020 Checking video card gamma table access for display 1... 2010-06-21 07:21:21,062 XRandR 1.2 is faulty - falling back to older extensions 2010-06-21 07:21:21,070 XRandR 1.2 is faulty - falling back to older extensions 
2010-06-21 07:21:21,071 Verify: 'test.cal' IS loaded (discrepancy 0.2%)
2010-06-21 07:21:21,110 XRandR 1.2 is faulty - falling back to older extensions 
2010-06-21 07:21:21,110 ...ok.
2010-06-21 07:21:21,111 Initializing GUI...
2010-06-21 07:21:22,083 ...ok.
2010-06-21 07:21:22,513 Loading calibration curves of current display device profile... 2010-06-21 07:21:22,544 XRandR 1.2 is faulty - falling back to older extensions 
2010-06-21 07:21:22,544 About to open dispwin object on the display
2010-06-21 07:21:22,545 About to clear the calibration
2010-06-21 07:21:22,545 About to set display to given calibration
2010-06-21 07:21:22,545 Calibration set
2010-06-21 07:21:22,545 About to destroy dispwin object
2010-06-21 07:21:22,545 ...ok.
2010-06-21 07:21:22,546 Ready.
2010-06-21 07:22:09,400 Timeout exceeded in read_nonblocking().
2010-06-21 07:22:09,401 <dispcalGUI.wexpect.spawn_unix object at 0x16e70d0>
2010-06-21 07:22:09,401 version: 2.3 ($Revision: 399 $)
2010-06-21 07:22:09,401 command: /usr/local/lib/Argyll_V1.1.1/bin/spotread
2010-06-21 07:22:09,401 args: [u'/usr/local/lib/Argyll_V1.1.1/bin/spotread', '-v', '-c1', '-a', '-x'] 
2010-06-21 07:22:09,401 searcher: searcher_re:
2010-06-21 07:22:09,401 0: re.compile("Hit ESC or Q to exit, any other key to take a reading:") 2010-06-21 07:22:09,402 buffer (last 100 chars): ment sensor to calibration position, 
2010-06-21 07:22:09,402  and then hit any key to continue,
2010-06-21 07:22:09,402  or hit Esc or Q to abort:
2010-06-21 07:22:09,402 before (last 100 chars): ment sensor to calibration position, 
2010-06-21 07:22:09,402  and then hit any key to continue,
2010-06-21 07:22:09,402  or hit Esc or Q to abort:
2010-06-21 07:22:09,402 after: <class 'dispcalGUI.wexpect.TIMEOUT'>
2010-06-21 07:22:09,403 match: None
2010-06-21 07:22:09,403 match_index: None
2010-06-21 07:22:09,403 exitstatus: None
2010-06-21 07:22:09,403 flag_eof: False
2010-06-21 07:22:09,403 pid: 13247
2010-06-21 07:22:09,403 child_fd: 7
2010-06-21 07:22:09,404 closed: False
2010-06-21 07:22:09,404 timeout: 30
2010-06-21 07:22:09,404 delimiter: <class 'dispcalGUI.wexpect.EOF'>
2010-06-21 07:22:09,404 logfile: None
2010-06-21 07:22:09,404 logfile_read: None
2010-06-21 07:22:09,404 logfile_send: None
2010-06-21 07:22:09,404 maxread: 2000
2010-06-21 07:22:09,405 ignorecase: False
2010-06-21 07:22:09,405 searchwindowsize: None
2010-06-21 07:22:09,405 delaybeforesend: 0.05
2010-06-21 07:22:09,405 delayafterclose: 0.1
2010-06-21 07:22:09,405 delayafterterminate: 0.1

Other related posts:

  1. Home
  2. argyllcms
  3. Archive
  4. 06-2010