[argyllcms] Re: ColorMunki Display not detected
- From: Federico Bruni <fedelogy@xxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Sun, 27 May 2012 23:29:54 +0200
Il 27/05/2012 20:41, Florian Höch ha scritto:
if you run dispcal -? does it show the ColorMunki under communication ports?
yes
$ dispcal -?
Calibrate a Display, Version 1.4.0
Author: Graeme W. Gill, licensed under the AGPL Version 3
Diagnostic: Usage requested
usage: dispcal [options] outfile
-v [n] Verbose mode
-display displayname Choose X11 display name
-d n[,m] Choose the display n from the following list
(default 1)
Optionally choose different display m for
VideoLUT access
1 = 'Screen 1, Output LVDS at 0, 0, width 1280, height 800'
-dweb[:port] Display via a web server at port (default 8080)
-c listno Set communication port from the following list
(default 1)
1 = 'usb:/bus0/dev2 (Xrite i1 DisplayPro, ColorMunki Display)'
2 = '/dev/ttyS0'
3 = '/dev/ttyS1'
4 = '/dev/ttyS2'
5 = '/dev/ttyS3'
Other related posts:
