Hi,i'am new on the list because i think argyll is a important software for linux and perhaps with more feedback the software will be better and better.
BTW: Sorry for my poor english!First the good news - the V0.7b5 support the DTP92Q. But i can't calibrate a screen under amd64-Linux (ubuntu and gentoo). After a short time, the testwindow change the color only in the first part. This occours after following messages (-d2):
icoms: About to return read '' ICOM err 0x2000 icoms: Write_Read Write failed - returning 0x2000 Sample read failed due to communication problem.Hit Esc, ^C or Q to give up, any other key to retry:icoms: About to return read ' X 27.64^I Y 55.79^I Z 12.23^M<00>9^I Z ' ICOM err 0x2000
icoms: Write_Read Write failed - returning 0x2000 Sample read failed due to communication problem. Hit Esc, ^C or Q to give up, any other key to retry: dtp92: About to init coms dtp92Q/dtp94: About to init USB icoms: About to set usb port characteristics usb_close_port() called usb port has been released and closed icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev3 (Xrite DTP92)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok icoms: Write_Read called with '0PR^M' icoms: About to write '0PR^M' ICOM err 0x0 icoms: Read called icoms: About to return read '<00>' ICOM err 0x0 icoms: Write_Read Write_Read success, returning '<00>'The same effect got i with the "i1" - the mac-Version runs with the "i1" (not testet with the DTP92Q).
I have also trouble to get a good profile with the "i1" and an Apple Cinema Display 20". But for this i start a new posting soon.
Best regards Udo