[amayausers.com] Re: z axis timed out
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 24 Jun 2010 23:40:31 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/976.html#000001
Several things could cause this but you need to see if you can turn over the Z
axis shaft by hand. If you can take out the needle....it could be bottoming out
on the rotary hook, the knife, the cutter or possibly the needlebar or rotary
hook are frozen from lint in the guide track or bushing or lack of lubrication,
a broken connecting rod can also be the culprit.
Push in the E Stop before you try to turn the Z axis shaft manually...
Rod Springer
Amaya ech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
