[amayausers.com] Re: x motor?
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 25 Mar 2012 12:36:23 UT
This message was posted by fourstate on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1322.html
i have a big red, it doesnt track very good.(if you do a large circle outline
with an edge stitch, the edge stitch will be off on one or more sides.) i have
only owned this machine for a couple of months but the same design works fine
on my other machine. i do hear a humming almost a grinding but i dont think it
is grinding, type noise when the machine is running slow or just starting up.
big red, os 7
thanks
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
