[amayausers] Re: small lettering for hat backs
- From: Mike Garber <agraphic2@xxxxxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 12 Jul 2006 12:49:51 -0700
I use Micro Block for lettering around .2.
Mike
Cindy Chamberlin wrote:
>All,
> Need to know which lettering is best for sewing on hat backs. I
>have been playing around with the different standard embroidery fonts that
>come with our software and I have not found any that are smaller than .25.
>This makes my sew out just over 5 inches and it does not sew well. The
>lettering is WWW.ADUBMOTORSPORTS.COM <http://www.adubmotorsports.com/> and
>is going on the back of flexfit hats that are a cotton / polyester blend. I
>am using a 70/10 sharp needle.
>
>
>
>Thanks
>
>Cindy Chamberlin
>
>Impressive Threads
>
>Phoenix
>
>
>
>===========================================================
>
>The AmayaUsers Mailing List
>Website: http://www.amayausers.com
>Discussion Board: http://www.amayausers.com/boards
>Subscribe/Unsubscribe: http://www.amayausers.com/list
>
>===========================================================
>
>
>
>
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
