[amayausers.com] Re: pinching / puckering on 100% ployester shirts
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 21 Aug 2009 19:13:49 UT
This message was posted by Judy on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/1018.html#000002
*If you're using auto tensioning, switch to manual, a setting of at least four,
and two layers of backing.
*Loosen the bobbin tension a tiny touch.
*Use a screwdriver to tighten the hoop after you have the shirt in it.
*If it's a silky poly that slips a lot, use sticky spray to adhere your backing
to the shirt wrinkle-free before hooping.
*Use pins around the outer edge to keep it from slipping after it is hooped.
To do this, make a fold right next to where the hoops come together, and pua a
pin through it right next to the hoops.
Use a shirt that has already puckered as your test shirt.
HTH,
Judy
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
