Hi Tom, Now that you mention it, it is both. I have more problems with the top thread not trimming, but I do have issues with the short bobbin trim as well. (the bobbin trimming so short that it will not pick up when the machine begins to sew again) Any thoughts as to why this is happening? Barbara -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Tom D'Auria Sent: Thursday, June 22, 2006 6:10 AM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: missed thread trims Hi Barbara - are you talking about short bobbins after trims and/or the top thread not being held in the grabber? If so, there are a few of us with this issue and I've been told Melco is aware of this. Let me know if these are your problems. Tom Dauria Mr. Sew & Sew --- Avalon Embroidery & Apparel <avalonembroidery@xxxxxxx> wrote: > Hi All! > > > I was wondering if anyone who has an XT seems > to have a lot of problems with > missed thread trims. > > > > Thanks! > > > > Barbara Costan > > Avalon Imprints and Embroidery > > San Diego, Ca. > > > > =========================================================== > > > The AmayaUsers Mailing List > Website: http://www.amayausers.com > Discussion Board: > http://www.amayausers.com/boards > Subscribe/Unsubscribe: > http://www.amayausers.com/list > > =========================================================== > > =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =========================================================== =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================