[amayausers.com] Re: machine spacing
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 27 Sep 2010 17:47:58 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1031.html#000001
If you put the largest hoops you have on your machines, press the E-Stop in and
manually move your X-carriage SLOWLY (one machine to the left and the other to
the right), check your clearance. Your machine with hoop needs to be able to
move freely without hitting the other machine's hoop. MOVE YOUR CARRIAGE BACK
TO CENTER POSITION SLOWLY AND REMEMBER TO DISENGAGE THE E-STOP before turning
on your machine again. Ours sit next to each other and I have enough room to
get between them to turn them on or off.
Sharon
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
