[amayausers.com] Re: Thread coming out of needle during sew out
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 16 Sep 2010 11:21:07 UT
This message was posted by GailForce Designs on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1022.html
I looked through old discussions to see if I could find this happening to
someone else, but found nothing that sounded like what's happening to me so
hopefully someone has an idea of what to try. :-)
I have an order of 100 golf towels. I stitched 81 with no issues. On #82 it
was halfway through the design and the thread started coming out of the needle
in the middle of a color sewout. I tried another towel and on the first color
of the design this happened again about 50 stitches into the color.
I've tried cleaning the trimmer/bobbin, oiling the trimmer, replacing the
needles on the 4 colors used in the design, sewing the design using different
colors on different needle positions, adjusting the presser foot height,
checking the bobbin tension(although the bobbin thread stays connected to the
sewout when the top thread comes up out of the needle), the in and out
stepper, going to a different design (which sewed out fine using one of the
same colors used in the golf towel design)then going back to the golf towel
design, same issue. This is not at trims, but during the middle of a colors
sewout. I have to have the last 19 towels done for tomorrow. Any suggestions
of anything to try are greatly welcome. Thanks!
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
