This message was posted by GF on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/617.html Has anyone already replaced this? I ordered the "tool" and parts for this and I'm looking at the instruction photos received from Melco tech support. Fig-1 shows the gear assembly with the tool in place, but then jumps to a Fig-2 showing the gear off the machine. Would like to see how the tool turns the gear shaft and how this assembly and/or wheel will come off after loosening the shaft. Does the shaft come out and the white gear will just be loose enabling me to wiggle it out between the stepper motor and thread rod below it? Also, does anyone have a photo of where to apply the #222 Loctite to the threads of the feeder drive gear shaft? There is no visual to help with this part. Any help is appreciated. Geri in NJ =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================