[amayausers] Re: Starting over in the middlle of design
- From: "Griffin William" <wag@xxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 6 Dec 2006 20:47:59 -0500
Thanks so much to Ron at Body Cover / Magic Stitches. We're in the midst
of redoing it and it seems to be exactly right--we stopped and extracted
at a good point, so it was not as difficult to match.=20
Again, thanks.
Bill
=20
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Body Cover
Sent: Wednesday, December 06, 2006 8:08 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Starting over in the middlle of design
I am hoping that you didn't mean re-hoop because if you did I'm
not sure you'll be able to get the design to line up again,
but not all designs are different, maybe it wouldn't be a problem.
anyway the easiest way is to make sure you have your hoop centered when
you originally
start the design, then make a note of the stitch number it is on when
you stop the design.
When you are ready to restart the design you load the original
center the hoop and then go to the settings drop down menu then select
the "move" tab
and on the section "move to stitch number" then enter the stitch number
from where
you left off and hit move. if need by you can use the arrow and hoop
keys to move
the hoop so that the laser aligns with the spot of the stoppage, but is
very difficult since
the laser is a loose guideline and not a exact marking system. Then hit
start and you should be=20
off and running. If you stopped the design as it finished a color and
before it moved to the next
you can go to the same menu and use the "move to color number" section
and input the number then
hit move and you'd be there. Remember this part is referring to the
color number in the list
as you enter them into the machine and NOT the number on the thread tree
(1-16) or the color
number on your threads.
Hope that is what you had in mind.
Ron Vinyard
Body Cover / Magic Stitches
1-888-435-0176
541-471-1504 Fax 541-471-0427
420 SW H Street, Grants Pass, OR 97526-2532
info@xxxxxxxxxxxxxxxxxxx
www.bodycoverdesign.com
----- Original Message -----=20
From: "Griffin William" <wag@xxxxxxxxxxxxxxxx>
To: <Amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, December 06, 2006 4:58 PM
Subject: [amayausers] Starting over in the middlle of design
> If I had to stop a design, have rehooped it, and want to start over at
> that point, how do I choose to start at that point?
>=20
> It's not that I have just stopped it-I have stitched out other designs
> in the meantime. So, this is a "start in the middle" command.
>=20
> Bill
>=20
>=20
> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=20
>=20
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>=20
> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=20
>=20
>
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=20
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=20
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
