This message was posted by Debbie Garifi on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/330.html Hi - I hope everyone had a great Thanksgiving. I just did practice sew outs on Nylon Oxford that I will be doing a 36K stitch logo on the back of Swim Parkas. I only have the backs so there is no lining of any kind yet. I used two layers of cutaway and on one I used a solvy topping. I used a 70/10 Sharp needle. What needs to be done to aleviate some puckering in areas of the design or letters that have curves/rounding? Oh I also made a window using tearaway on top to avoid the hoop slipping on the nylon oxford. It was hooped tight and could have been used as a drum! Could that be the problem????? Please advise asap. Debbie Design Wizard Embroidery =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================