[amayausers.com] Re: Setting up a new hoop
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sat, 10 Oct 2009 13:58:51 UT
This message was posted by FME540 on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/3/443.html#000002
Jo-Anne,
You cannot add the EMC hoop to the drop down for your XT. The offsets and
clearances would not be correct and the machine could crash into the hoop.
You need to add a new hoop to the database using the correct size, offsets, and
margins for your XT machine. Adding a hoop is rather difficult and confusing
the first few times. I would recommend that your read the manual and then
contact the Melco service department for assistance so you don't damage the
machine.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
