[amayausers.com] Re: Saving in .vip file extension
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sat, 15 May 2010 12:27:15 UT
This message was posted by Barbara Bunker on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/3/544.html#000001
Whether your Designer 1 uses a floppy disk or a USB stick, all designs have to
be formatted so the machine can read them. They become an .shv design. That's
done through a Viking software program called Disk Manager which is available
through the purchase of the 4D Organizer program or 4D Embroidery programs (or
earlier versions of these programs). I know you can create a floppy disk
through Embird but don't know about the USB stick.
The machine can't read a .vip design directly. But the Viking software can
read .hus, .pes, .exp, .vip (and several more) and convert them to .shv.
So, part of the answer to your questions is that you don't have to save the
file in .vip -- .exp will work -- but you have to have the capability of
writing (through software) to the floppy or USB stick.
Barb Bunker in Broomfield, CO
PS: I've had my D1 for ten years -- it's a wonderful machine!
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
