Hello,
Linda H has just posted in the Software forum of AmayaUsers Discussion Boards
under the title of enter an integer 0 and 10.
This thread is located at
http://www.amayausers.com/discussion/showthread.php?6207-enter-an-integer-0-and-10
Here is the message that has just been posted:
***************
Hi
In the Settings - Machine Window there is one of the numbers that is incorrect.
Tools -- Settings -- Machine Tab
TBS Calibration Thread break sensitivity is 0
Feed Adjust is 21
Backup On Thread Break
Upper 10 Stitches
Bobbin 17 Stitches
When I loaded my software I received a similar error but mine was saying 0 to
17 as my bobbin stitches had 20 shown. Once I changed error went away.
In looking at this I am betting you have a larger number in the Upper box and
it wants you to put 10 in there.
Hope that solves it. If it doesn't and you have those numbers then call Tech
Support they should be able to get it resolved.
Linda H
Melco Certified Trainer/Technician
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
