[amayausers.com] Re: NEBS style bobbins & tension
- From: "Rod or Sharon" <springer37@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 8 Mar 2012 23:11:54 -0700
My thoughts are that either there is a defective rotary hook assembly, or
debris of some sort stuck inside the bobbin case not allowing the new bobbin
to go all the way in. I just know it isn't the NEB bobbin.
Sharon
--------------------------------------------------
From: <theboards@xxxxxxxxxxxxxx>
Sent: Thursday, March 08, 2012 2:10 PM
To: <amayausers@xxxxxxxxxxxxx>
Subject: [amayausers.com] Re: NEBS style bobbins & tension
This message was posted by GF on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/3/691.html#000004
I agree with Sharon. NEB bobbins also have always given me the best
results. I'd ask your tech why your needle was hitting the plastic? That
would point to a different issue. The needle should not hit the bobbin.
Going to a magnetic core seems like a way to override the problem rather
than fixing it?
Sharon, why would the needle hit the bobbin? What are your thoughts on
this? Just curious now...
GF
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
