[amayausers] Re: Microfiber backing?
- From: "Mike Doe" <MDoe@xxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxxxxx>
- Date: Thu, 4 Mar 2004 12:29:00 -0700
Paul,
Nylon mesh would be better than poly mesh for the simple reason that =
nylon does not fray on the edges. This would be a good choice on =
microfiber.
Mike Doe
Melco | SaurerGroup
1575 W. 124th Avenue
Denver, Colorado 80234
USA
303.457.1234 Tel xt.1145
303.252.0508 Fax
mdoe@xxxxxxxxx
www.melco.com
-----Original Message-----
From: Paul Tilton [mailto:ptilton@xxxxxxxxx]
Sent: Thursday, March 04, 2004 12:21 PM
To: amayausers@xxxxxxxxxxxxxxxx
Subject: [amayausers] Microfiber backing?
I have some microfiber windshirts to embroider, am wondering what to do=20
about backing.....I am thinking maybe poly mesh as it will not be as=20
"stiff" as cutaway in the end.... Suggestions? Thanks...
Paul Tilton
---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
Other related posts:
- » [amayausers] Re: Microfiber backing?
