This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1269.html#000001 Di, For starters, I do not like the sticky back on the fast frames, especially with metallic thread. Lots of fraying and thread break problems...use regular backing like poly mesh, etc, and tape it to the top of your fast frame, place your garment over the top of it and use small clamps to clamp the garment, backing and fast frame--frame edge together...works great... Slowing the machine down is also a good idea as you suggested. The needle size is ok, may not work as well on any small lettering present, but you indicated these were 2" so it shold not be a problem. Density, lighten up a bit...say if you are using a 3 density, go to 4, etc...... this is one you have to experiment with to get it right.... A zig zag underlay would also help.... The thing that would give you the most problem, is that sticky back backing with the velvet and metallic thread combination..... Rod Springer Amaya Tech & Trainer =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================