[amayausers.com] Re: Logo on dry-wick performance knit
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 5 Mar 2009 15:37:33 UT
This message was posted by Steve I on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/332.html#000004
I have had very good results by using a cut away next to the shirt and a tear
away behind that. Because the fabric is slick and stretchy I use a little
(stress little) 505 adhesive to keep the fabric from pushing. If you wanted to
replace the cut away with a mesh for the thinner and light colored shirts it
works also.
Steve I.
Trinity Embroidery
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
