[amayausers] Re: Logo on Leather
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 27 Jul 2007 00:03:03 UT
This message was posted by Steve I on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/189.html#000004
Your best bet is to try some columns with different densities on the sample
leather you have. Find a point where there is good coverage but not too dense.
A tri-point needle would be ideal but if you don't have any use a light ball or
a sharp. Use lighter density than you normally would. Remember you are not
sewing on a woven fabric. Even though leather is tough if your density is too
tight it may tear. You may want to slow things down a little to avoid heat
problems. Good luck
Steve I.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
