[amayausers] Re: Lettering Box properties issue
- From: "Rod or Sharon" <springer37@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Fri, 15 Dec 2006 08:22:30 -0700
There is a "drop down arrow" at the right side of the stitch type box. Click
on this and select "satin" form the stitch types listed ....
Rod Springer
Rod & Sharon Springer
Embroidery Cottage
Melco EMT & Amaya Technician & Trainers
Design Shop Pro+ & Digitizing
Boise, ID 83713
208-938-3038
----- Original Message -----
From: "Image Embroidery" <imageembroidery@xxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Friday, December 15, 2006 8:14 AM
Subject: [amayausers] Lettering Box properties issue
> All of a sudden there have been some changes to my lettering properties
> box that do not make sense.
> The "stitch type" box is now set at "fill" instead of "satin".
> I did not change this, and I need it changed back, beacuse I do not always
> think to look at that box!
> HELP!!!!
> LuAnn @ Image Embroidery
> Because Your "Image" Matters
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
