Russell, On the hooded jackets lower the design 4" or so. After hooping pull the hood over the hoop to see how much is covered. Remember the hood will actually sit a little higher when worn then when sitting flat. Hope this helps. Aaron Sargent The Linen Barn linen@xxxxxxxxxxx Medford, Oregon ----- Original Message ----- From: "Russell" <russell@xxxxxxxxxxxxxxxx> To: "amayausers" <amayausers@xxxxxxxxxxxxx> Sent: Thursday, February 17, 2005 5:16 AM Subject: [amayausers] Jackets > Hi all, > I am doing jacket, some with hoods some without, on the jackets with hoods should I lower the design on the back or use normal placement, it is a fairly large design with lettering all around it, > > Thank you > Russell Silva > R. S. Embroidery > 508-222-4433 > >