I had the same problem.. But Found that all I had to do was reset the design.. Then all was well. Have you tried that? John ----- Original Message ----- From: "Rod & Sharon" <springer37@xxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxxxxx> Sent: Sunday, November 10, 2002 12:31 AM Subject: [amayausers] Hoop not re-centering > After sewing a design and you are ready to bring up a second design to sew, > we are having to reboot, or turn on and off the machine, to get it to center > again--command on the computer or on the key pad will not cause the hoop to > center. Therefore, the next design cannot be centered correctly. This > learning curve can be a real challenge can't it! > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > > --------------------------------------------------------------------- To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx