[amayausers.com] Re: Hook timing
- From: Eldred J Swapp <joelswapp@xxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 13 Nov 2011 17:30:36 -0800 (PST)
Keep in mind that you want to put a new needle in before timming and adjusting
the gap. It would be a useless waste of time to do the timming and gap
adjustment with a bent needle.
Joel
--- On Sat, 11/12/11, theboards@xxxxxxxxxxxxxx <theboards@xxxxxxxxxxxxxx> wrote:
From: theboards@xxxxxxxxxxxxxx <theboards@xxxxxxxxxxxxxx>
Subject: [amayausers.com] Re: Hook timing
To: amayausers@xxxxxxxxxxxxx
Date: Saturday, November 12, 2011, 6:22 PM
This message was posted by WF on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL.
Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1257.html#000004
use a small mirror to check the gap than u can adjust it to the closest without
touching the needle.
werner
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
