[amayausers.com] Re: Group Names v9
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 19 Feb 2009 06:45:57 UT
This message was posted by integrity on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/3/305.html
When using the group names in the lettering properties, I have found the
following problems or new quirks:
1) used to be able to separate the names with a comma, use "add" and have the
names show up on different lines, like with a return between names in place of
the comma;
2) won't save names in the master list upon apply or closing and saving the ofm
file;
3) if I select "separate files" and save to an exp file, it used to save each
name with a serial number in front, now it won't or I can't find where it saved
the separate names
4) and, before, I could select each name in the right column and make
individual adjustment to the letters and spacing between, or shift letters, but
It will no show the individual name for fine tune editing in the main
digitizing screen.
Well, that's enough to start the dialog,
Dave
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
