[amayausers.com] Re: Embroidering on a polo - HELP
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sat, 16 May 2009 01:24:04 UT
This message was posted by Eye Kandy Designs on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/937.html
Been trying to embroider a pretty simple logo on a Dickies polo shirt but it is
just not turning out very well. It is all lettering (a standard Arial type
font for the logo and melco script font for the name under the logo)...both are
at 0.70" high. I have tried several settings but the columns just are not
consistent. Was wondering if someone could give me some settings that they
have found useful. Also I am using 2 pieces of backing...should I also be
using dissolve material on top?
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
