[amayausers.com] Re: DesignShop Not pulling up on Computer
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 18 May 2010 21:10:34 UT
This message was posted by GF on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL.
Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/3/545.html#000002
You may have checked this already, but sometimes it's the easiest to overlook.
Check that your dongle is seated properly, or try putting your dongles in a
different USB port. Your short may have affected the USB port, or you may have
knocked it slightly ... you can easily check that by trying to read a USB card
from that slot. If you don't already have a serge protector, this may be a good
example of why that's important. Without knowing for sure what kinds of errors
you are getting and in what sequence you are getting them in, I would suggest
uninstalling the Melco software; reboot; make sure the directories/folders are
gone; then reinstall. If you know how, go into the registry and clean the
registry up before the reinstall. If you don't know how to make adjustments to
your registry, please don't go there without a tech helping you out. Good
luck...these are frustrating problems to deal with, but breathe and take your
time. GF
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
