[amayausers.com] Re: Design shop question
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 22 Feb 2008 15:52:03 UT
This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE
DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/3/164.html#000008
Natalie,
Make sure you are using the "sewing from center to out" feature when sewing
caps or visors. This is found on the "Lettering Tab" in your properties window
in Design Shop for this design. It's a small button (of three) that has an ABC
on it with a two headed arrow pointing in both the left and right direction.
This will enable the design to start sewing from the center and first out to
the right and then from center out to the left. This minimizes the shift that
takes place when sewing an unstable garment from one extreme end to another.
Also, make sure your hooping is straight and tight.
Good Luck,
Ed Orantes
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
