This message was posted by gcannon on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/3/686.html#000006 Your designs are most likely saved in a .dst format- pet peeve of mine for the Amayas. You can try to convert the file to wireframe, but, usually, this opens up a whole new can of worms- but not always. You can fix the little things that go haywire when you do this- it just takes time. If your digitizer can't send you an .ofm file, see if he/she can save it as a .cnd- still not as good as .ofm, but much better than .dst. If you need to know how to convert to wireframe, just click on the entire design in the tree and scroll down to "operations" and click on "convert to wireframe"- viola! You can also convert seperate elements of the design. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================