[amayausers.com] Re: Design not filled in when stitched
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 6 Sep 2007 20:45:39 UT
This message was posted by Pure Embroidery on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/226.html#000002
Classic problem with purchased designs. Always test sew them before you do an
actual job. Then see what needs adjusted. The design may be perfect on a woven
fabric, but need serious underlay for a knit.
I have this happen quite a bit, go into the design and convert the elements
that need adjusting to wireframe and manually digitize as necessary to adjust
fills and densities.
You may also have registration problems. Move the elements as needed. Remember,
you will have more shifting on a knit polo than a woven dress shirt. I usually
save two or more versions of the same design for each type of fabric that I sew
on. One for Jersey knit, one for pique polos, one for demim, one for wovens.
Depending on the brands of shirts I use, the wovens and denims can use the same
design.
Red polos are another story. I usually have to put more underlay on red shirts.
Hope this helps. Remember that these designs weren't created for your AMAYA,
they were saved in a format for your AMAYA.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
