[amayausers.com] Re: Corel Draw X4

This message was posted by Oregonian1a on AmayaUsers.com. PLEASE DO NOT REPLY 
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/3/354.html#000003

Juli,

Design Shop Pro+ can open files directly from Corel Draw, but you have to save 
them as Corel Draw version 9 or later. In you save as screen in Corel there is 
a drop down window that lets you select the file format version of the drawing.

One thing that I have had trouble with when trying to insert the Corel into a 
project that has started is that Design Shop Pro+ seems to get confused and 
seems to try to vectorize existing bitmaps. My solution was to open the Corel 
draw file in a seperate project, digitize that portion and save. Then insert it 
as an embroidery file into my project.

Hope this helps. I will post a neat trick about this in a seperate post.

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: